Spanish
English
Polypropylene marine step with steel core
The marine step (P-ESC-01, and P-ESC-02) is manufactured in polypropylene and a 12mm steel core. diameter, giving the part excellent strength and bearing capacity.
| Technical data |
Description
The marine step (P-ESC-01, and P-ESC-02) is manufactured in polypropylene and a 12mm steel core. diameter, giving the part excellent strength and bearing capacity.
The steps are raised at the lateral ends to prevent the foot from slipping, in addition to being slip-resistant.
-The inner side of the step is ergonomic and allows better hand grip.
– The piece has a stop limiting penetration into the wall, and tips with nine rings that act as anchor seals once inserted into the hole, the step is immobilized.
– Its production materials make it resistant to corrosive drainage steam, abrasion and humidity.
– Its main uses are:
– Municipal sanitary sewer manholes.
– Sewage sewers.
– Pluvial Collectors.
– Cisterns.
– Electrical records.
– Basements.
– Silos.
– Swimming pools.
– Roof access walls.
– Among others.
The pieces are easy to assemble since it is only necessary to drill two holes in the solid wall a little deeper than the part of the step to be anchored, (in the case of block or semi-hollow walls, you should look for the totally solid points of the wall).
Important: Drill accurately as the step does not require cement or mortar, otherwise it will be necessary to fill the holes with these to ensure safe installation.
The ends of the step are inserted and gently tapped in slightly, then use a mallet to vigorously tap each end alternately until the full depth is reached.
It is considered zero theft, as its recycling value is practically zero.
Because it is made of plastic, it is both lightweight and resistant to impact and excessive degradation.
Product manufactured under international quality standards, which makes it highly functional.
